CrossRef 16. Hardin BE, Snaith HJ, McGehee MD: The

renaissance of dye-sensitized solar cells. Nat Photonics Crizotinib order 2012, 6:162–169.CrossRef 17. Zhang CF, Zhang JC, Hao Y, Lin ZH, Zhu CX: A simple and efficient solar cell parameter extraction method from a single current–voltage curve. J Appl Phys 2011, 110:064504.CrossRef Competing interests The authors declare that they have no competing interests. Authors’ contributions SMC, MHK, and SDL conceived and designed the experiment. SMC and SUK fabricated the TNP patterns. SMC and HLP fabricated the DSSC array, performed the electrical and optical measurements, analyzed the data, and interpreted the results. HLP, MHK, and SDL wrote the paper. All authors read and approved the final manuscript.”
“Background Recently, there has been a tremendous interest in 3D printing which is one of research branches in additive direct printing approach of functional materials. Additive direct printing method has relatively SB273005 concentration shorter history compared with conventional photolithography- and vacuum deposition-based microelectronics fabrication processes. Direct printing method has made dramatic progress with the invention of drop-on-demand (DOD) inkjet printer and has gained significant interest as an alternative to conventional integrated circuit (IC) process especially in the area of low-cost flexible

electronics [1–3]. Conventional photolithography-based processes are basically subtractive approach which wastes most of the expensive buy LOXO-101 materials away during the process, and so, they are hard to accommodate any changes during the process. Furthermore, conventional IC processes

involve multistep; therefore, they are very time consuming and expensive. In this regard, the DOD inkjet printing as an additive process has drawn tremendous attention because inkjet printing is fully data driven and maskless process which allows more versatility than other direct printing methods. The material is deposited in a carrier solution on the substrate by a piezo-electrically driven micro capillary tube. This solution processing provides high flexibility for choosing both the depositing material and the substrate [1]. The inkjet printing method opened a new research Decitabine order area in the direct nanomaterial manipulation on the predetermined locations with a controlled morphology and a specific location of nanoparticles [4–6] and nanowires [7, 8], and more recently, direct local nanowire growth by seed nanoparticle inkjet printing has been demonstrated by Ko et al. [9]. Conventional nanomaterial manipulation uses a series of multisteps for growth, harvest, and placement of nanowires, which are very time consuming, expensive, and low yield. Inkjet printing of nanomaterials could overcome the difficulties encountered in multi-step serial processes, new approaches use the direct growth at specific location with desired nanowire morphology.